View Full Version : Shipping Shims/rubbers
UNV-IT!!!
09-26-2007, 02:53 PM
Does anyone know if they ship the G37S with shipping shims in the front suspension in order to raise the front end up as to not scrape it when moving and removing it from trucks. My G37S front end seems unusally high for some reason compaired to the rear. I have maybe a finger gap in the rear and a little more then three in the front. All the pics i look at the front does not look that high on any car.....
only one way to find out...look for yourself. however, i tend to think that if you have driven the car semi-hard at all, the shims would fall out (especially under hard cornering/slalom)
UNV-IT!!!
09-27-2007, 12:42 AM
well i have not driven hard at all. i only have 125 miles on the motor and am breaking it in. Not trying to run it to the ground. I did look. there seems to be a white rubber cover over the lower portion of the springs. The odd thing is it only covers one coil on the drivers side and two coils on the passanger side. I'm getting in on my buddy's lift tomorrow to get under and inspect it.....
you own a performance shop and you dont have your own lift? sounds like there isn't too much performance to be had there ;) haha jk. i pick my car up tommorow, i'll let you know if my springs have the same thing.
i see nothing of what you're talking about, though maybe i'm not looking hard enough. you solve your "problem" yet?
vBulletin® v3.6.5, Copyright ©2000-2010, Jelsoft Enterprises Ltd.